Bat File

Home » Tweaks & Customizing » Tweaking All Other Operating Systems » Bat File

Bat File

Rate Topic

Display Mode

Topic Options

Author

Message

CvenAF1

Posted 10/21/2004 5:42 AM

New Member

Group: Forum Members
Last Login: 10/22/2004 12:52 AM
Posts: 2, Visits: 1

I am trying to create a .bat file that will allow me to telnet into a switch copy the running config, exit out of that switch and move onto another one.

The problem i am having is that i can only telnet into the switch. It wont log me in or do any of the other commands.

here is what my command looks like

Telnet XXX.XXX.XXX.XXX

*Username for tacacs*

*Passoword for tacacs*

enable

*enable password*

copy running-config tftp

*Tftp* address

Post #22058

relder

Posted 10/21/2004 5:42 AM

Forum Moderator

Group: Moderators
Last Login: 8/13/2007 11:17 AM
Posts: 3,966, Visits: 1,057

You can't use a Microsoft command line to do this, therefore no bat file. Once you're into your switch, you need to use the Cisco IOS.

__________________________________________________

Post #116638

CvenAF1

Posted 10/21/2004 5:42 AM

New Member

Group: Forum Members
Last Login: 10/22/2004 12:52 AM
Posts: 2, Visits: 1

Thanks i found another way, i am just using scripting

Post #116639

« Prev Topic | Next Topic »

Reading This Topic

All times are GMT -6:00, Time now is 5:44am