|
| | | New Member
Group: Forum Members
Last Login: 8/24/2006 7:13 PM
Posts: 3, Visits: 4 |
| i have two hub both 10Mbps.
H1 is my main hub and H2 is second one
i have connected one cat5 from uplink of H1 to pin 5 of H2
it was working fine till yesterday but suddenly the uplink pin is showing no connection (i.e LED doesn't glow) while other end in H2 (Pin 5) shows connection  . I m not able to find the solution. i had cahnge both crimping but not able to solve it. while two comp connected from H2 are well connected i can share file etc.
only problem is, there is no connection between H1 and H2 ( both HUB are brand new) . pls tell me the crimping code or other method to solve this problem.
Whether i should use uplink or direct H1 to H2 (no uplink) i.e any pin form H1 and to any pin in H2. if it is so then pls tell me colour coding
|
| |
| | | 
Junior Member
Group: Forum Members
Last Login: 11/12/2006 3:38 PM
Posts: 169, Visits: 20 |
| you should just have to use a straight cable
color code is: WOrange, Orange, WGreen, Blue, WBlue, Green, WBrown, Brown.
All the forces of evil needs to succeed is for enough good men to do nothing.
-Edmund Burke |
| |
|
|
