hi. I have a MSI GeForce 3 Ti200. It has a S-Video IN & OUT and a TV out (looks like a RCA jack but dont know if thats how you call it). Ok and I also have a TV with a S-Video IN.
When I plug the TV to the pc, and do a reboot the TV screen blinks, shows some colors and then goes black again and the monitor stays black the hole time.
I have the lates Nvidia Drivers for my video card.
So my question is, is there something I'm not doing right?

?

i dont know about the nvida, but check
display properties / SETTINGS tab /ADVANCED button/DISPLAYStab

most of these scan converters in video cards for tv output signals want the screen to be set to lower resolutions and refresh rates, OR if its a "Duel Head"  meaning tv acts as a second monitor, that PART of it has to be set for a low res, low refresh rate.

TVs (in NTSC) are 30frames per second 60 Fields per second, and have a vertical resolution of 525 lines total about 480 used for the picture, and horizontal resolutions can vary but are about 350-1200 on lots of this stuff.  

so Once YOU know that.   try 640x480 800x600 and a 60htz refresh, and see if you get something that the tv can actually accept. then play with it.

Thanks PsychoGeek

on the last Nvidia drivers there is a part where i can pick between NTSC and PAL.

And a hole bunch of combinations(example:M/NTSC, D/PAL) with the coresponding contry next to it.

I have it set on the good one, but sitll doesnt show up on the TV monitor.

ps: I once got the TV monitor to go to the winXP loading screen then it when black.

so at least I know my S-video out is good

so what more can i do. is there some kind of software I can get? to help

is this always this complicated to get n image on the TV monitor

ps: I once got the TV monitor to go to the winXP loading screen then it when black

your own answer was right here :-) when xp boots it does so at a lower res and refresh rate.  have you tested putting your screen res  at 640x480 and 60htz refresh?  then work up from there.

yes its always a pain :-)  and never looks for pooh either, but a good scan converter is 200-1500$ and up.

yes I tryed the lowes res I can get thats 800x600 with 60 hertz and still nothing. (It doesnt go to the winxp loading screen) i just get a flash in the TV monitor and then the colors (you know the color screen, TV chanels put when they are not broadcasting) after the "colors" I get nothing, all black.

so if my only option is to buy the scan converter I guess thats it for me and trying to watch my .avi, .mpg, ... on my TV. 

its totally possible, there are at least 3 users here who have NVIDA with tv outs, they will help you.

yes and I hope they read

thanks for for help PsycoGeek